مركز الميكنة متعددة الوظائف Chiron FZ 08K S Magnum SK

Manufacturer
Chiron
Model
FZ 08K S Magnum SK
Year
2007 - 2017
Observations
Vertical CNC machining center - 5 axis
Overall Review: Factory Refurbishment in 2017
Working hours: approx. 22,500 h
With NC swivel head, rotary table, bar feeder and discharge system
CNC Control & System:
Control CNC: Siemens 840D
Cabezal basculante NC
Swivel range: -20° / +115°
Husillo principal:
Type: Water-cooled motorized spindle
Maximum Speed:
15,000 rpm
Working routes:
X-axis: 450 mm
Y-axis: 270 mm
Z-axis: 310 mm
Speeds:
Fast forward: X/Y/Z: 75 m/min
Acceleration: X: 1 g. Y: 1.5 g. Z: 2 g
Tool Changer:
Number of tools: 40 positions
Cone Type: HSK-A40
Tool-to-tool changeover time: 2.6 seconds (vertical)
Additional equipment:
· Preparation for bar machining
· AWU 160 rotary table
· Rotary table diameter: 105 mm
· Additional positioning axis
· Plato portapinzas Hainbuch Spanntop D100
· Additional device for machining the sixth side
· Automatic system for extraction and evacuation of finished parts
· IRCO SiMag 100.1-3000 Bar Feeder for Round and Roll Forming Material
· Washing Gun
· Preparation for internal tool cooling (IKZ)
· 70 bar high-pressure system with Varioventil valve
· Device Washing
· Chip Conveyor Type Scraper
· Chip discharge height: 1050 mm
· VRF Rotary Vacuum Filter 400 Liters Manufacturer KNOLL
· MAHLE Switched Dual Filter
· Electric cabinet refrigerator
· Signal light tower
· Tool Life Monitoring
· Single F500 Tool Break Control
· Renishaw TS27R 3D Probing System
· Brankamp Marposs CMS 100 Collision Monitoring System
Accessories included:
· Breuning IRCO Guide Channel Sets
· Hainbuch clamping pliers (according to agreement)
· Approximately 500 HSK-A40 tool holders
· Spare parts for this type of machine
· Machine-specific consumables
Production Concept:
The facility is designed for 24/7 automated production of cubic parts without a handle.
The material is fed by a bar feeder up to 100 mm in diameter and 3000 mm in length, for both round and profiled material.
The rotary table acts as a positioning axis, allowing the four side faces to be machined using the vertical milling spindle.
The fifth side is machined horizontally using the tilting head.
The workpiece is then cut, rotated 180° and the sixth side is machined also with the tilting head.
The finished parts are automatically removed by a handling system and deposited in a parts magazine.
Machine Status:
· General review carried out by the manufacturer in 2017
· Last spindle change made in September 2025
· Last full annual maintenance performed in October 2025
· The machine has been continuously maintained by the manufacturer through a full service contract, including preventive maintenance and technical upgrades.