وحدة حفر الآبار Adler B25

Of course

ADLER B25 Drilling Rig – Almost New – Only Approx. 340 Operating Hours – Fully Ready to Drill

For sale is an ADLER B25 drilling rig in very well-maintained condition.

We are selling the machine only because we have upgraded to a larger and heavier drilling rig.

The machine has only approx. 340 operating hours, works perfectly, and is in excellent technical and optical condition. Apart from normal signs of use, it looks almost like new.

New filters and an oil service have recently been carried out. The drilling rig is fully operational and ready for immediate use. It is sold as a complete package, including extensive accessories, drill rods, drill bits and a matching trailer.

ADLER B25 Drilling Rig – Base Machine

Base machine weight: approx. 1,700 kg

Overall width: 880 mm

ADLER F17 crawler undercarriage

Hydraulically telescopic crawler undercarriage from 725 mm to 1,125 mm

Powered by a 3-cylinder Kubota diesel engine

Engine power: 18.5 kW / 25 hp

Oil cooler for the hydraulic drive of the drilling rig

Multifunction display with digital operating hour counter

Hydraulic levelling via 4 separately pivoting support legs

Each support leg can be controlled hydraulically and individually

Optical levelling indicator with spirit level

Hydraulically foldable and erectable drill mast, 1,500 mm

Pullback force: 12 kN

Feed system with hydraulic motor and roller chain

Infinitely adjustable feed speed

Feed length: 1,800 mm

Swivelling control panel for drilling operation

Transport position: length 3,250 mm, height 1,960 mm

Central lubrication point at the front

Pressure gauge for flushing pump pressure

Emergency stop switches for travel drive and drilling operation

Hydraulic rod clamp

Lighting unit with work light and impact protection

Safety guard in the area of the rotating drill rods

ADLER F-Series F17 Crawler Undercarriage

High-quality, high-torque travel drive

Hydraulic track width adjustment for high stability

Wide rubber tracks for improved traction and reduced ground pressure

Equipped with 4 tie-down points for quick and easy load securing

Load capacity including undercarriage: 1,700 kg

Load capacity excluding undercarriage: 1,380 kg

Undercarriage weight: 320 kg

Length: 1,344 mm

Minimum width: 725 mm

Maximum width: 1,125 mm

Height: 336 mm

Track dimensions: L 180 x W 72 x H 40 mm

Ground clearance / obstacle crossing height: 182 mm

Mounting height: 286 mm

Travel speed: 2.8 km/h

Max. oil flow per motor: 20 l/min

Max. torque per motor: 1,443 Nm

Max. pressure: 206 bar

AGBK 200 Two-Speed Gear Drilling Head

Two-speed gear drilling head AGBK 200

1st gear, slow: 220 daNm / 45 rpm

2nd gear, fast: 110 daNm / 90 rpm

Suitable for:

Flush drilling

Dry drilling

Geological exploration, limited

Through flushing head shaft: 2 1/2" / 63.5 mm

Rod connection: BOM 73.5 mm

Suitable for water and air

Driven by two hydraulic motors

Electric switching of gear stages

Flushing Pump

Single-stage centrifugal pump, hydraulically driven

Max. flow rate: 64 m³/h

Max. pressure: 6 bar

Adjustable flow rate

Drill Rods

40 drill rods

Dimensions: 1,500 mm x Ø 82.5 mm

Thread: BOM 73.5 mm

Internal passage: Ø 57 mm

Outer diameter: Ø 82.5 mm

Drill Bits / Drill Crowns

PCD drill crown D149.2 mm / 5 7/8", type ST3K

Connection: BOM 73.5 mm pin

With spirally arranged carbide gauge strips

Suitable for soft to medium-hard formations

Step drill crown 149 mm, BOM 73.5 mm thread

3-wing drill bit 5 7/8" / 149 mm

Step drill crown 172 mm, BOM 73.5 mm thread

Step drill crown 195 mm, BOM 73.5 mm thread

Flush Drilling Accessories

Pilot auger for casing pipe

219 mm casing pipe with overflow and connection for maintaining the water column

Device for screwing in the casing pipe

Mechanical rod breaking tool

F17 Lifting Clamp

Diameter range: 148 – 219 mm

Lifting force: 80 kN

Stroke: 200 mm

3.5-Ton Braked Car Trailer

Unsinn UBA 3536

Gross vehicle weight: 3.5 tons

Including loading ramps

Internal width: 1.80 m

Internal length: 3.60 m

11 tie-down points

Empty weight: 825 kg

ADLER Trailer Setup for Drilling Rig

The trailer is fully designed for the ADLER B25 drilling rig and includes:

Drill rod magazine

Mounting system for flushing basin and filter screen

Holder for casing pipe

Holder for pilot auger and screw-in device

Storage rack for PE pipes and filter pipes

2 material transport boxes

Summary

This ADLER B25 drilling rig is a very clean, fully operational and immediately ready-to-use complete drilling package for flush drilling, dry drilling and smaller geological exploration jobs.

With the extensive accessories, drill rods, various drill crowns, flushing pump, lifting clamp and matching 3.5-ton trailer, the machine is ready to go straight to work.

No rental.
Serious enquiries only.

For further questions, viewings or additional photos, please feel free to contact us.